KONDO | MC Übertrager CFz Reinkupfer

KONDO | MC Übertrager CFz Reinkupfer
3.300,00 € *

inkl. MwSt. zzgl. Versandkosten

Versandkostenfreie Lieferung!

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

  • SW10407
Unsere Referenz in Sachen MC Übertrager! Der Hersteller Audio Note Japan ist mit seinern KONDO... mehr
Produktinformationen "KONDO | MC Übertrager CFz Reinkupfer"

Unsere Referenz in Sachen MC Übertrager!

Der Hersteller Audio Note Japan ist mit seinern KONDO Produkten eine Legende im High End Bereich. Kondo steht für höchste Verarbeitungsqualität, best möglicher Wiedergabe-qualität und authentishcen, natürlichen Klang.

Der in aus dem SFZ abgeleitete Kupferübertrager CFz ist einer der vom Verhältnis Besten Preis / Leistung Übertrager.

Anbei der original englische Text des Herstellers:

In combination with phono amplifier GE-1 etc, CFz is one of the best MC step-up transformers to recover the rich musicality and highest sounding quality from analog disc.
Based on the silver wire application know-how compiled over many years in transformer winding, CFz is designed to reach full performance of a step-up transformer by using copper wire and a new and original winding technique.
In addition, a strong core, which is with the same design and material as SFz, is used to further improve the sound quality. Result is open and natural sound with stunning freshness, giving delicate expression with wide dynamic range.


  • Newly developed multi-layers winding structure specialized to match with the use of pure copper wires; rich sound with refine smoothness is obtained.
  • A large size core laminated of extremely thin 0.1 mm permalloy, realizing low loss and low distortion.
  • Double shields structure made of a permalloy case and a pure copper inner case.
  • Double float mechanical damping by special selected materials.
  • Signal output is direct with minimum connections. New product KSL-VcII copper cable is used as output cable.
  • The chassis is made of pure copper to guarantee open sound and stable sound.

Multi-layer winding transformer

Multi-layer winding structure is used to maintain flat frequency response up to 100kHz. The peaking level is less than 1.5dB* even under no loaded condition at the secondary. (* connecting to a phono amplifier with 47kΩ input impedance.)

Multi-layer winding transformer

Extremely Thin Permalloy Core

Employed in the CFz is a large core built up with custom made ultra thin permalloy layers (100μm thickness). This unique design controls and suppresses eddy current and hysteresis loss to gain a flat response up to 100kHz. The core structure has a big sectional area and short magnetic circuit path to assure ultra low frequencies while maintaining extremely low distortion

Extremely Thin Permalloy Core

Double Shield and Double Float Mechanical Damping Construction

The transformer is mounted in permalloy case and further covered by a inner chassis made of copper. The permalloy shield works against magnetic while the copper shields Fights the electrostatic.
The transformer is carefully held with damping gel. Special rubbers are is selected and used on the feet in order to further absorb mechanical vibration.

carefully held with damping gel


Product MC step-up transformer
Primary impedance 1.5Ω (for 1Ω~10Ω cartridge),
30Ω (for 11Ω~40Ω cartridge)
Step-up ratio 34dB(1.5Ω), 20dB(30Ω)
Load impedance 47kΩ(recommended)
Dimension 126mm(W) 76mm(H) 163mm(D)
(excluding protrusions)
Weight 2.7kg
Output cable KSL-VcII (copper cable) 1m/RCA



Weiterführende Links zu "KONDO | MC Übertrager CFz Reinkupfer"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "KONDO | MC Übertrager CFz Reinkupfer"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Zuletzt angesehen